Contact
Magtrol  
Systèmes de test moteurs
Logiciel de test d'endurance
 
PRODUITS
SERVICES
SUPPORT
FICHE TECHNIQUES
SOCIÉTÉ
CONTACT
PLAN DU SITE
 
Cette page en cours de traduction n'est pas encore disponible en français . Vous pouvez néanmoins avoir accès à son contenu en anglais.

 

DURABILITY TEST 1.0 Motor Testing Software

Data SheetManual
 
Magtrol’s DURABILITY TEST 1.0 is a PC-based motor testing program for use with Windows®2000/XP operating systems. Used with a National Instruments™ USB-6008 Multifunction DAQ, a Magtrol 5210 Current-regulated Power Supply, and a compatible Magtrol Hysteresis Brake, DURABILITY TEST 1.0 applies user-defined torque load profiles to a motor under test.

Labview Twenty-four step profiles can be defined by brake current level and time interval. For each step, current can be set to a new value, ramped to a new value, or held constant over a selectable period of time. Profiles can be looped for any number of cycles and can be saved for future tests.
Durability Software
Written in LabVIEW™, DURABILITY TEST 1.0 can be run in “Single” mode for a single test setup or “Dual” mode if two test setups are to be controlled from the same PC. A graph displays progress in real time as the software steps through a test profile..
 
Applications

DURABILITY TEST 1.0 is well-suited for simulating motor loads and performing survivability tests.
 
Magtrol SA (Suisse): +41 26 407 3000 • magtrol@magtrol.ch | Magtrol Sarl (France): +33 1 40 09 6161 • magtrol@magtrol.fr
Contact English French German Chinese India Russian Systemes de test moteurs Capteurs de couple Systemes de charge-force-poids Regulation de tension Mesure de deplacement Transmetteurs rotatifs